OSHA 30-Hour Construction

OSHA 30 Hour Construction

The OSHA 30 Hour Construction Industry Outreach Training course is a comprehensive safety program designed for anyone involved in the construction industry. Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Construction workers must receive additional training, when required by OSHA standards, on specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA 30-Hour Construction Outreach DOL course completion card within 1-2 weeks. The 30 Hour Construction Outreach course is NOT equivalent to the OSHA 510 or 511 courses and will not meet the course prerequisites to take the OSHA 500 or 501 courses.

OSHA 30 Hour Construction Course Outline

  1. Orientation
  2. Introduction to OSHA and the OSH Act
  3. Recordkeeping
  4. Basic Safety Orientation
  5. General Safety and Health Provisions
  6. Health Hazards: Hazard Communication
  7. Health Hazards: Hazardous Materials
  8. Process Safety Management: (PSM)
  9. Personal Protective Equipment
  10. Fire Protection
  11. Materials Handling and Storage
  12. Hand and Power Tools
  13. Welding and Cutting
  14. ocus Four “ Electrical Safety
  15. Focus Four Struck-By and Caught in Between Hazards
  16. Focus Four Fall Protection
  17. Cranes and Rigging
  18. Motor Vehicles
  19. Excavations
  20. Concrete and Masonry Construction
  21. Stairways and Ladders
  22. Confined Spaces
  23. Lead Safety in the Workplace
  24. Use of Explosives in the Workplace
  25. Scaffolds
  26. Final Exam

30 Hour Construction Learning Objectives

  • Given OSHA historical events and current information, the student will be able to explain the importance of OSHA in providing a safe and healthful workplace to workers covered by OSHA.
  • Locate OSHA Standards references applicable to specific hazardous conditions and practices (Introduction to OSHA Standards)
  • Recognize the aspects of 1926 Subpart C (General Safety and Health Provisions)
  • Implement preventative measures for accidents in their workplace (Subpart D – Occupational health and Environmental Controls)
  • Describe types of personal protective equipment (PPE), and the requirements for use in OSHA standards (Subpart E – Personal Protective Equipment)
  • Understand the requirements for fire protection in the workplace (Subpart F – Fire Protection and Prevention)
  • Identify types of rigging equipment used to protect employees (Subpart H – Rigging; Subpart N – Cranes and Rigging)
  • Identify the critical health and safety hazards of welding and cutting in the construction industry (Subpart J – Welding and Cutting)
  • Implement measures for protecting workers and equipment from dangerous falls (Subpart M – Fall Protection)
  • Recognize the hazards associated with working in or around excavation sites (Subpart P – Excavations)
  • Understand the safety requirements necessary to protect workers around concrete and masonry jobs (Subpart Q – Concrete and Masonry)
  • Identify the precautions and hazards to protect workers using explosives or blasting agents (Subpart T – Demolition)
  • Protect workers who perform jobs on or around stairways or ladders at worksites (Subpart X – Stairways and Ladders)
  • List and describe the hazards and prevalence of confined spaces
  • Identify common electrical hazards and related OSHA standards (Subpart K – Electrical Standards)
  • Understand the importance of scaffolding for workers in elevated workplaces (Subpart L – Scaffolding)

Exam and Quiz Information

At the end of each module, you will be given a 10 question module quiz. You must score at least 70% on each module quiz to move forward in the course. You will be given up to three opportunities to pass each module quiz. Failure to successfully pass the quiz will result in being locked out of the course and not allowed to continue with an online training format for your outreach training. Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this course. You will be given up to three opportunities to pass the final exam; if you do not pass it after three tries, you will be locked out of this course will no longer be able to take your outreach training in an online format. There is a 6 month time limit to complete the course package.

For more details Visit OSHA Outreach FAQ’s.

Summary
product image
Aggregate Rating
2 based on 13 votes
Brand Name
EHS Practice
Product Name
OSHA 30 Hour Construction
Price
$ 169.00

Course Information

$135 $122.00

Course Duration: 30 hr

Course Delivery Method: Online

Add to Cart

Alabama | Alaska | Arizona | Arkansas | California | Colorado | Connecticut | Delaware | Florida | Georgia | Hawaii | Idaho | Illinois | Indiana | Iowa | Kansas | Kentucky | Louisiana | Maine | Maryland | Massachusetts | Michigan | Minnesota | Mississippi | Missouri | Montana | Nebraska | Nevada | New Hampshire | New Jersey | New Mexico | New York | North Carolina | North Dakota | Ohio | Oklahoma | Oregon | Pennsylvania | Rhode Island | South Carolina | South Dakota | Tennessee | Texas | Utah | Vermont | Virginia | Washington,DC | Washington | West Virginia | Wisconsin | Wyoming

$122.00 | Add to Cart
© ehspractice.com is a registered trademark of REX Training.